I’m not sure if you guys know this or not, but I’m kinda obsessed with Pinterest. This sounds really cheesy and kumbaya-y, but the truth is, Pinterest helps restore my faith in the human race. There are so many clever, creative and interesting ideas on there that it makes me feel like, as a species, we must be doing something right.
That all being said, there is a dark side to it all. Pinterest has a bit of a reputation of being the place where good ideas go to die. Millions of people may pin something and say, “Oh! I’m totally going to do that.” but in actuality, only a small percentage actually do. People pin without acting. I’ve been guilty of this too! No more. Enter my monthly Pinterest Challenge. The idea comes from Young House Love. You pick one pinned project each month (they do it seasonally) and actually do it. I know, crazy, right?
While I’m sure all of them will be made at some point, I landed on tackling the cake stands for my very first Pinterest Challenge. I am always looking for new and interesting ways to display food for food photography, and I’m all about an economical way to add some fun new pieces to my dishware collection. So let me step you through my process from Goodwill to cake stand!
First up, we (obviously) had to hit up the thrift store. We made the 1 minute drive over to our local Goodwill and hit up the impressive dinnerware section. Babyface and I spent about 20 minutes stacking different plates and glasses in the aisle trying to figure out the best shape and proportion for both a standard cake stand and a cupcake tier. What we kept in mind—interesting texture that would come through once painted, flat (not cupped) plates and how sturdy everything felt together. We probably looked more than a little insane sitting on the floor of our Goodwill store.
After we’d paid for out loot at the Goodwill, we crossed the street to the hardware store to pick up paint and adhesive. I desperately wanted to paint my cake stands in bright and obnoxious colors, but the truth is, I just wouldn’t use them. Almost all of my dishes for food photography are white because it helps make the food stand out so much better. If they were bright colors, I know I wouldn’t use them. So white it was.
We also picked up some frosted glass spray “paint” as recommended by the original blog post. The frosted glass works as a primer on the ceramic and glass pieces so the spray paint can stick well. You can skip this step if you happen upon some spray paint made for glass (we didn’t see any).
Once home, I spread out our drop cloth (what, you don’t use TMNT sheets as a drop cloth?) and spread out our plates and glasses for a primer coat of the frosted glass stuff.
One thin coat and a 10 minute drying period later (the stuff dries fast), it was ready to be painted.
Over the course of three days, I ended up doing about four thin, even coats of white spray paint on each side just to make sure everyone was even and covered. Between each coat, I let it bake out in the sun for 4-6 hours so it could get nice and dry. This is the spray paint we used. Mostly because it was on sale, and partially because of the 2X coverage.
All white and even!
I let the plates and glasses cure for a few more days (paint may feel dry and not tacky, but it can still nick and dent for days after it’s been painted) before assembly. Once I felt like they were ready to be put together. I pulled out the adhesive we bought. This silicone adhesive is waterproof and heatproof. Which means that these stands can be handwashed in warm water without a problem.
I worked one piece at a time and did a thin, evenish bead all the way around the contact points.
And then I did the really scientific method of eyeballing it in the center of the next item. You can move around the adhesive, so I’d center it, and then use a paper towel to wipe of any extra adhesive. Note: the “3” in this picture was written in permanent marker on the bottom of the plate, even after three coats, I couldn’t get it covered. I just left it because it was on the bottom.
Per the directions on the adhesive, I let the stands cure for 24 hours before moving them. I took them outside for one more touch up coat of paint, let that dry and cure and then hand-washed them to remove any extra goop or gunk.
And then, BAM, they were ready for some store-bought baked goods.
I am so in love with these. I have a quirky and eclectic style, and I love that they aren’t matchy-matchy. I also really appreciate the fact that this is upcycling at its finest. We took some sad wares that would probably never been purchased and made them into something beautiful and useful. Also worth noting, I am so glad I went with the white! I think both the brightly-frosted cupcakes and the deeply-rich chocolate cake pop off the white so nicely.
And the best part of all? Total cost: $26.23. And about half of that was for the frosted glass paint, the spray paint and adhesive, which can all be used for other projects. That’s how much just the single cake stand would cost alone in the stores!
I’d call this first Pinterest Challenge a success!